ORICOM DTX4300 MICRO SIZE 5 WATT UHF CB RADIO + ANU220 ANTENNA
- Save $10000
The DTX Series of UHF CB Radios are the first and best of their breed and have become an essential communication tool for on and off the road.
The Oricom DTX4300 Micro Size 5-Watt UHF CB radio is a well-crafted unit, packing a real punch for its ultra-compact size, and is one of the smallest fixed mount UHF CB radios on the Australian market.
The unit has a powerful 5-Watt operation, 80 channels with 38 CTCSS and DCS Codes, 3 memory groups and smart fast scanning, ensuring you’re always connected.
- Ultra compact micro size
- 96 colour LCD backlit display
- Flip LCD function
- Over voltage alert function
- Heavy duty microphone
- 3 memory groups
- Smart fast scanning (priority/
- group memory/ group tone scan)
- Back light brightness (4 pre-set levels plus auto)
- Rotary volume/channel and squelch control
- 38 CTCSS & DCS codes
- Diecast metal chassis
- Auto power off (off/1h/2h/4h)
- 3.5mm external jack (for optional external speaker)
- Designed and engineered in Korea
- Requires antenna (not supplied)
- BONUS ANU220 Antenna
Q. What are the wiring configurations for connecting to the vehicles power supply?
A. 1) Radio stays ON when the ignition is switched OFF:
Connect the radio’s negative (black) lead to the vehicle chassis, or directly to the battery’s negative terminal. Connect the radio’s positive (red) lead via the 2 Amp fuse to the battery’s positive terminal. Alternatively, the positive lead could be connected at the fuse box at a point that has DC Power continuously available (preferably the battery side of the ignition switch) via the 2 Amp fuse.
2) Radio turns OFF with the ignition switch:
Connect the radio’s negative (black) lead to the vehicle’s chassis, or directly to the battery’s negative terminal. The radio’s positive (red) lead should connect to an accessory point in the vehicle’s fuse box via the 2 Amp fuse.
Q. How do I turn the unit on?
A. Press and hold the Channel selector.
Q. How do I set the volume level?
A. Turn the channel selector clockwise to adjust the sound level for comfortable reception. On the microphone push the up or down buttons to increase or decrease the volume. If held down the volume will increase or decrease quickly.
Q. How do I select a channel?
A. Press channel selector once. “CH” will appear on the LCD. Select the channel by rotating the channel knob.
On the microphone push the mode button and select the channel using the up or down buttons.
Q. What is the PTT?
A. PTT refers to Push To Talk. Pressing the PTT button activates the transmitter. The RF (radio frequency) level will appear on the LCD as you are transmitting. To receive, release the PTT button and then TX will disappear on the display. When transmitting, hold the Mic two inches from your mouth and speak clearly in a normal voice across the front of the Mic area.
Q. How do I factory reset this radio?
A. Turn radio on while pressing the ANT button. There are two reset levels All Reset “AL reset” and All except the user programmed memories “User reset”. The reset type can select in menu mode. “All reset” will clear all memory and settings back to the factory default settings. “User reset” will clear all settings except user programmed memory channels they will be preserved.
Q. How do I flip the LCD display?
A. Rotate channel selector to select filp direction vv or nn.